Super Single Flute Edge Carbide Single-Edge Milling Tools
The single-edge cutters are particularly suitable for aluminum milling, but they also give excellent results on soft chip plastics and resins, especially if used at high rotation and feed rates.
Advantage
1. Easily Discharge Waste
2. Not Stick to Cutter
3. Low Noise
4. High Finish
Feature
1. Super Sharp Flute Edge
Completely new flute edge design, perfectly improved cutter performance.
2. Super Smooth Chip Evacuation
Redesigned large chip flutes while ensuring that the cutter is strong. The chip removal performance is greatly improved to prevent chip sticking.
3. High Precision Spiral
We tested out perfect spiral precision solution based on previous spiral, more smoothly on cutting and outfeeding.
Operation Manual
In order to avoid the cutter from twisting due to excessive pressure,all cutting bits aredesigned to rotate clockwise.
When all the cutters are finished,they have passed the balance test to ensure thatthere is no doubt about runaway. In order to again ensure that the tools are free fromswing and runout during use,please pay attention to selecting machinery and equip-ment and excellent jackets.
The jacket must be of appropriate size. If the jacket is found to be rusty or worn,thejacket will not be able to clamp the cutter properly and correctly. Please replace thejacket with standard specifications immediately to avoid the cutter from rotating athigh speed handle vibration,flying off or breaking the knife.
The installation of the cutter shank should be in accordance with EU regulations,and the clamping depth of the cutter shank must be more than 3 times the diameter of the shank to maintain the proper pressure bearing range of the shank.
Cutter with larger outer diameters should be set according to the following tachometer,and slowly advance to maintain a uniform advance speed. Do not stop the advance during the cutting process. When the cutter is blunt, please replace it with a new one.Do not continue to use it to avoid tool breakage and work-related accidents.Choose the corresponding cutter for different materials. When operating and processing,please wear safety glasses and push the handle safely. When using desktop ma-chines and equipment,you also need to use anti-rebound devices to avoid accidents caused by rebounding of work objects during high-speed cutting.
| Flute Diameter(mm) | Flute Length(mm) | Shank Diameter(mm) | Total Length(mm) |
| 1 | 2.5 | 3.175 | 38 |
| 1 | 3 | 3.175 | 38 |
| 1.5 | 3 | 3.175 | 38 |
| 1.5 | 6 | 3.175 | 38 |
| 1.5 | 12 | 3.175 | 38 |
| 2.0 | 6 | 3.175 | 38 |
| 2.0 | 8 | 3.175 | 38 |
| 2.0 | 12 | 3.175 | 38 |
| 2.0 | 22 | 3.175 | 45 |
| 3.175 | 17 | 3.175 | 38 |
| 3.175 | 22 | 3.175 | 45 |
| 3.175 | 25 | 3.175 | 50 |
| 3.175 | 32 | 3.175 | 45 |
| 4 | 17 | 4 | 45 |
| 4 | 22 | 4 | 45 |
| 4 | 32 | 4 | 55 |
| 6 | 17 | 6 | 50 |
| 6 | 22 | 6 | 50 |
| 6 | 25 | 6 | 50 |
| 8 | 17 | 8 | 60 |
| 8 | 22 | 8 | 60 |
| 8 | 32 | 8 | 60 |
| 8 | 42 | 8 | 60 |
| 10 | 25 | 10 | 75 |
| 10 | 32 | 10 | 75 |
| 12 | 25 | 12 | 75 |
| 12 | 32 | 12 | 75 |
Q1:Can I have a sample for testing?
A: Yes, we can support sample. The sample will be charged reasonably according to the negotiation between us.
Q2:Can I add my logo on the boxes/cartons?
A:Yes,OEM and ODM are available from us.
Q3: What are the benefits of being a distributor ?
A: Special discount Marketing protection.
Q4:How can you control the quality of products?
A: Yes, we have engineers ready to assist customers with technical support problems, any issues that may arise during the quoting or installation process, as well as aftermarket support. 100% self-inspection before packing.
Q5:Can I have a visit to your factory before the order?
A: Sure,welcome your visit of factory.
