Selecting equipment to provide the highest quality and productivity in a welding operation goes beyond just the power source or welding gun — consumables play an important role, as well. Contact tips, in particular, can make a significant difference between running an efficient process and accruing downtime to rectify problems. Selecting the right contact tip for the job can also impact the profitability of the welding operation.
Contact tips are responsible for transferring the welding current to the wire as it passes through to create the arc. Optimally, the wire should feed through with minimal resistance, while still maintaining electrical contact.
Contact tips can make a significant difference between running an efficient welding process and accruing downtime to rectify problems, and they can also impact the profitability of the welding operation.
For that reason, it is always important to select a high-quality contact tip. While these products may cost slightly more than lesser-grade products, there is long-term value to negate that upfront purchase price.
Furthermore, higher-quality contact tips are typically machined to tighter mechanical tolerances, creating a better thermal and electrical connection. They may also feature a smoother center bore, resulting in less friction as the wire feeds through. That means consistent wire feeding with less drag, which eliminates potential quality issues.
Higher-quality contact tips can also help minimize burnbacks (the formation of a weld inside the contact tip) and help prevent an erratic arc caused by inconsistent electrical conductivity. They also tend to last longer.
Selecting the right material and bore size
Contact tips used for semi-automatic MIG welding are typically composed of copper. This material provides good thermal and electrical conductivity to allow consistent current transfer to the wire, while also being durable enough to withstand the heat generated during the welding process. For robotic welding, some companies choose to use heavier-duty chrome zirconium contact tips, as these are harder than copper ones and better withstand the increased arc-on time of an automated application.
In most cases, using a contact tip that matches the size of the wire leads to the best results. However, when wire is fed from a drum (e.g. those 500 pounds and larger) and/or when using solid wire, an undersized contact tip may improve welding performance. Because wire from a drum tends to have less cast, it feeds through the contact tip with less or no contact — having a smaller bore exerts more pressure on the wire, creating greater electric conductivity. Undersizing a contact tip, however, can increase friction, resulting in erratic wire feeding and, potentially, burnback.
Conversely, using an oversized tip can decrease current transfer and increase tip temperatures, which can also lead to wire burnback. When in doubt about selecting the proper size contact tip, consult a trusted consumable manufacturer or welding distributor.
As a best practice, always check the connection between the contact tip and the gas diffuser to be certain it is secure. Accordingly, a secure connection reduces electrical resistance that could lead to overheating.
Understanding contact tip recess
Contact tip recess refers to the position of the contact tip within the nozzle and is an important factor influencing weld quality, productivity and costs in a welding operation. Specifically, correct contact tip recess can reduce the opportunity for excessive spatter, porosity and burnthrough or warping on thinner materials. It can also help minimize radiant heat that could cause premature contact tip failure.
Contact tip recess directly impacts wire stickout, also called electrode extension. The greater the recess, the longer the stickout is and the higher the voltage. Consequently, this makes the arc slightly less stable. For that reason, the best wire stickout is generally the shortest one allowable for the application; it provides a more stable arc and better low-voltage penetration. Typical contact tip positions are 1/4-inch recess, 1/8-inch recess, flush and 1/8-inch extension. Refer to Figure 1 for recommended applications for each.
| Recess/Extension | Amperage | Wire Stick-Out | Process | Notes |
| 1/4-in. Recess | > 200 | 1/2 – 3/4in. | Spray, high-current pulse | Metal-cored wired, spray transfer, argon-rich mixed gas |
| 1/8-in. Recess | > 200 | 1/2 – 3/4in. | Spray, high-current pulse | Metal-cored wired, spray transfer, argon-rich mixed gas |
| Flush | < 200 | 1/4 – 1/2in. | Short-current, low-current pulse | Low argon concentrations or 100 percent CO2 |
| 1/8-in. Extension | < 200 | 1/4 in. | Short-current, low-current pulse | Difficult-to-access joints |
Extending contact tip life
Contact tip failure can result from a number of influences, including burnbacks, mechanical and electrical wear, poor welding operator technique (e.g., variations in gun angle and contact-tip-to-work-distance [CTWD]), and reflective heat from the base material, which is common in tighter access weld joints or confined areas.
The quality of the wire being used can also affect contact tip life. Poor quality wire often has an undesirable cast or helix that can cause it to feed erratically. That can prevent the wire and contact tip from connecting properly through the bore, consequently resulting in low conductivity and high electrical resistance. These issues can lead to premature contact tip failure due to overheating, as well as poor arc quality. To extend contact tip life, consider the following:
• Use the proper drive rolls to ensure smooth wire feeding.
• Increase wire feed speeds and lengthen the CTWD to minimize burnbacks.
• Select contact tips with a smooth surface to prevent wire snagging.
• Trim the MIG gun liner to the correct length so that the wire feeds through properly.
• Lower operating temperatures, if possible, to reduce electrical wear.
• Use shorter power cables when possible to gain smoother wire feeding. If longer power cables are necessary, try to minimize loops in them to prevent kinking.
In some instances, it may be desirable to convert to a water-cooled MIG gun to help keep the front-end consumables, including the contact tip, cooler and running for longer.
Companies should also consider tracking their contact tip usage, noting excessive changeover and addressing accordingly with some of the suggested precautions. Addressing this downtime sooner than later can go far in helping companies reduce unnecessary costs for inventory, while also improving quality and productivity.
Post time: Jan-04-2023
