The red button is the emergency stop button. Press this switch and the machine tool will stop. Generally, it is pressed in an emergency or accidental state.
Start from the leftmost. The basic meaning of the four buttons is
1 Program automatic operation refers to the use of automatic program operation when processing the program. It is a common processing. In this state, the operator only needs to clamp the product and then press the program start button.
2 The second is the program editing button. Mainly used for editing programs
3 The third is MDI mode, which is mainly used to manually input short codes such as S600M3
4 DNC mode is mainly used for connecting line processing
These four buttons are from left to right
1 Program reset button, used for reset operation
2 Fast feed mode, press this button to move quickly with the corresponding axis
3 Slow feed, press this button and the machine tool will move slowly accordingly
4 Handwheel button, press this button to operate the handwheel
1 Program restart button
2 Machine lock command, press this button and the machine tool will be locked and will not move. Used for debugging
3 Dry run, usually with the machine lock command, used for debugging programs.
The switch on the left is used to adjust the feed rate. The one on the right is the spindle speed adjustment button
From left to right, they are the cycle start button, program pause, and program MOO stop.
This represents the corresponding and spindle. Generally, machine tools do not have 5-axis and 6-axis. You can ignore it.
Used to control the movement of the machine tool. Press the key in the middle to feed quickly.
They are spindle forward, spindle stop, and spindle reverse.
Xinfa CNC tools have the characteristics of good quality and low price. For details, please visit: CNC Tools Manufacturers - China CNC Tools Factory & Suppliers (xinfatools.com)
Digital and alphanumeric panel, no need to explain this, just like the keyboard of a mobile phone or computer.
POS key means coordinate system. Press this key to see relative coordinate, absolute coordinate and machine tool coordinate system.
ProG is program key. Corresponding program operation generally needs to be operated in the mode of pressing this key.
OFFSETSETTING is used to set the coordinate system tool setting.
Shift is the shift key.
CAN is the cancel key. You can press this key to cancel the wrong command.
IUPUT is the input key. This key is required for general data input and parameter input.
SYETEM system key. Mainly used to view system parameter settings.
MESSAGE is mainly information prompt.
CUSTOM graphic parameter command.
ALTEL is the replacement key used to replace instructions in the program.
Insert is the insert instruction used to insert program code.
Delete is mainly used to delete code.
RESET is very important. It is mainly used to reset, stop the program and stop some instructions.
The buttons are basically finished. You need to practice more on site to get familiar with them.
Post time: Jul-21-2024
