1. Tell the customization company the data you measured.
After you measure the data, you can start looking for customization. Provide others with the data you have measured, instead of directly telling others what specification of milling cutter you want, because you don't know which specification of milling cutter you want. And it is possible that the specification you think is not the same as the production company's specification. Therefore, you only need to tell others the data you have measured, and the company's staff can naturally judge the specifications of the milling cutter based on the data you provide.
2. You can measure by yourself.
Under normal circumstances, when milling cutter factories customize milling cutters, they will first measure the approximate size of the milling cutters that need to be used on the machine tool. Of course, this step generally requires a lot of people to carry out. If you want to measure an accurate data, then you have to ask someone to do the measurement. After all, it is not possible to measure very accurate data for this inexperienced person. Of course, there are also many factories that do not measure before customizing milling cutters. They will directly go to the company that makes the milling cutters to communicate with the staff, but this is actually more troublesome. After all, if you do not have the approximate size of the measurement, That company didn't know if it could make such a milling cutter. So you go and measure first.
3. After confirming the company, confirm the data.
If you have already selected a company, then you can ask the staff in that company to confirm the data, because the data you measured is not accurate, and it is not the data that others want, so you can let the company's work staff to confirm again.
In short, it is quite troublesome to choose the right size when milling the machine tool, and the above three steps are normal steps, you can follow these three steps.
Post time: Jul-25-2013
