Angle Holder

Short Description:

Mainly used for machining centers and gantry milling machines. Among them, the light type can be installed in the tool magazine and can be freely converted between the tool magazine and the machine spindle; the medium and heavy types have greater rigidity and torque, and are suitable for most machining requirements. Because the angle head expands the performance of the machine tool, it is equivalent to adding an axis to the machine tool. It is even more practical than the fourth axis when some large workpieces are not easy to flip or require high precision.

Send email to us

Product Detail

FAQ

Product Tags

Application

1. It is used when it is difficult to fix large workpieces; when precision workpieces are fixed at one time and multiple surfaces need to be processed; when processing at any angle relative to the reference surface.
2. The processing is maintained at a special angle for profiling milling, such as ball end milling; the hole is in the hole, and other tools cannot penetrate the hole to process the small hole.
3. Oblique holes and grooves that cannot be processed by the machining center, such as the internal holes of the engine and the casing.

Precautions

1. General angle heads use non-contact oil seals. If cooling water is used during processing, it needs to be operated before spraying water, and the direction of the cooling water nozzle should be adjusted to spray water toward the tool to prevent cooling water from penetrating into the body. In order to prolong life.
2. Avoid continuous processing and operation at the highest speed for a long time.
3. Refer to the parameter characteristics of the angle head of each model and use it under appropriate processing conditions.
4. Before use, you need to confirm the test run for a few minutes to warm up the engine. Every time you process, you need to select the appropriate speed and feed for processing. The speed, feed, and depth of cut during processing should be adjusted in a gradual manner until the maximum processing efficiency is obtained.
5. When processing the general standard angle head, it is necessary to avoid processing materials that will produce dust and particles (such as: graphite, carbon, magnesium and other composite materials, etc.)

Previous: 1-13mm 1-16mm 3-16mm B16 Keyless Drill Chuck For Drill Press

Next: BAP300R Milling Cutter Bar

Q1:Can I have a sample for testing?
A: Yes, we can support sample. The sample will be charged reasonably according to the negotiation between us.

Q2:Can I add my logo on the boxes/cartons?
A:Yes,OEM and ODM are available from us.

Q3: What are the benefits of being a distributor ?
A: Special discount Marketing protection.

Q4:How can you control the quality of products?
A: Yes, we have engineers ready to assist customers with technical support problems, any issues that may arise during the quoting or installation process, as well as aftermarket support. 100% self-inspection before packing.

Q5:Can I have a visit to your factory before the order?
A: Sure,welcome your visit of factory.